查看: 2021|回复: 2
收起左侧

[求助] centos yum不能安装软件

2017-8-23 16:43:04 | 显示全部楼层 |阅读模式
[root@centos-rpi3 ~]# ping www.qq.com
PING www.qq.com (61.135.157.156) 56(84) bytes of data.
64 bytes from 61.135.157.156 (61.135.157.156): icmp_seq=1 ttl=53 time=7.37 ms
64 bytes from 61.135.157.156 (61.135.157.156): icmp_seq=2 ttl=53 time=7.43 ms
64 bytes from 61.135.157.156 (61.135.157.156): icmp_seq=3 ttl=53 time=9.30 ms
^C
--- www.qq.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 7.370/8.037/9.307/0.903 ms
[root@centos-rpi3 ~]# yum -y install vim
Loaded plugins: fastestmirror
base                                                                                                                                                                    | 3.6 kB  00:00:00     
http://mirror.centos.org/altarch ... epodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found
Trying other mirror.
To address this issue please refer to the below knowledge base article

https://access.redhat.com/articles/1320623

If above article doesn't help to resolve this issue please create a bug on https://bugs.centos.org/



One of the configured repositories failed (CentOS Kernels for armhfp),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Run the command with the repository temporarily disabled
            yum --disablerepo=centos-kernel ...

     4. Disable the repository permanently, so yum won't use it by default. Yum
        will then just ignore the repository until you permanently enable it
        again or use --enablerepo for temporary usage:

            yum-config-manager --disable centos-kernel
        or
            subscription-manager repos --disable=centos-kernel

     5. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=centos-kernel.skip_if_unavailable=true

failure: repodata/repomd.xml from centos-kernel: [Errno 256] No more mirrors to try.
http://mirror.centos.org/altarch/7/kernel/armhfp/kernel-$kvariant/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found


回复

使用道具 举报

2017-8-25 21:45:16 | 显示全部楼层
换一个yum源
回复 支持 反对

使用道具 举报

2017-10-24 23:36:33 | 显示全部楼层
换国内的yum源吧,百度一下,什么都知道
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

楼主其他主题

热点推荐

关注我们,了解更多

官方微信

服务时间:10:00-16:00

13714503811

公司地址:深圳市龙岗区南湾街道东门头路8号

Copyright © 2012-2020 Powered by 树莓派论坛 2019.4  粤ICP备15075382号-1
快速回复 返回列表 返回顶部