|
Raspberry Pi Model A |
Allwinner A10/ARM Cortex A8 |
CuBox |
Price |
$25 ($35 for Model B) |
[strike]$15[/strike] (*see correction below) |
$129 |
CPU |
700 MHz ARM core (ARM 11) |
1.5 GHz Cortex A8 ARM core |
800Mhz Marvell Armada 510 processor (ARM7) |
Video |
1080p hardware-accelerated video playback; HDMI or composite RCA |
2160p hardware-accelerated video playback; 2 24-pin RGB/TTL interfaces, HDMI out |
1080p video playback; HDMI |
GPU |
Broadcom VideoCore IV, OpenGL ES 2.0, 1080p30 h.264/MPEG-4 AVC high-profile decode
|
MALI400MP OpenGL ES 2.0 GPU |
OpenGL Embedded Standard 2.0 Graphics Engine |
RAM |
128 MB RAM (256 MB on Model B) |
up to 1gb RAM |
1 GB |
NAND Flash controller? |
No |
Yes |
MicroSD slot supports up to 64GB microSDXC NAND flash memory |
SDIO |
1
|
4 |
No—microSD (for OS flash card; comes with 2 GB card) |
USB ports |
1 (2 on Model B) |
1 USB port and 1 USB-OTG |
2 and 1 microUSB |
SATA |
No |
1 SATA-II |
3 SATA-II |
10/100 Ethernet |
Model B only |
Yes |
Yes |
Other |
2×13 header pins for GPIO, SPI, I2C, UART, +3.3 V, +5 V |
GPIO, I2C, PWM, Keyboard Matrix (8x8), built-in resistive touchscreen controller |
Infrared receiver, microUSB for debug con sole, “unbrickable” |