树莓派论坛

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
查看: 4680|回复: 1
收起左侧

Raspberry pi 安装 kali 无线网卡EDUP的问题

[复制链接]
发表于 2013-5-21 15:12:38 | 显示全部楼层 |阅读模式
我用Raspberry pi 安装 kali 想玩无线破解,结果用EDUP的网卡型号是EP-N8508GS,无法用,不知道是驱动的问题还是其他哪里?
附上kali官网上无线排错的网页:http://cn.docs.kali.org/troubleshooting-cn/%E6%97%A0%E7%BA%BF%E9%A9%B1%E5%8A%A8%E7%96%91%E9%9A%BE%E6%8E%92%E8%A7%A3


root@kali:/# dmesg |grep wlan
[  720.161303] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2564.277480] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
root@kali:/# dmesg |tail     
[    5.385591] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
[    5.537851] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
[    5.684766] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100k)
[    5.804742] Registered led device: led0
[    7.256471] usbcore: registered new interface driver rtl8192cu
[   14.097717] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   24.603031] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   28.252501] NET: Registered protocol family 10
[  720.161303] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2564.277480] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
root@kali:/#

回复

使用道具 举报

 楼主| 发表于 2013-5-21 15:46:38 | 显示全部楼层
STA驱动(Ralink, Broadcom)还有其他厂商生产提供的驱动都不支持监听模式,难道是这款网卡不提供监听模式?

root@kali:/# airmon-ng start wlan0


Interface       Chipset         Driver


root@kali:/#
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|手机版|Archiver|树莓派论坛 ( 粤ICP备15075382号-1  

GMT+8, 2024-11-26 02:03 , Processed in 1.093750 second(s), 25 queries , Gzip On.

Powered by Shumeipai.net! X3.2

© 2001-2015 树莓派论坛安全联盟

快速回复 返回顶部 返回列表