bianbian 发表于 2012-8-9 09:47:41

全程扩展版Gertboard is here!

f you’re a regular on this website, you’ll be familiar with this name. Gert van Loo, an all-round good egg and upstanding gentleman, designed the original alpha hardware that the Raspberry Pi Model B is based on. Many of you will be aware of the Gertboard, a little add-on board designed by Gert for the Raspberry Pi, which expands the Raspberry Pi’s GPIO pins and will allow you to interface with the outside world.
Gertboard is now available exclusively through element14.
http://www.raspberrypi.org/wp-content/uploads/2012/08/gertboard_raspi.pngGertboard (left) and a Raspberry Pi - photograph courtesy of element14

If you want to use your Raspberry Pi to drive motors to open doors, lift things, or power robotics; if you want to sense temperature and switch devices on and off; if you want to flash lights; or if you want to learn about electronics from scratch, then Gertboard is for you. (This is the stuff I’m talking about when I blither on about physical computing here.) It comes with an assembly manual and a user manual, which also act as a pair of teaching guides, bundled with plenty of programs to show you how to put things together.

Gertboard is packaged as a kit. It doesn’t come preassembled; you will have to solder it together yourself. Soldering is easy, as we’ve said before (seriously – if I can solder, so can you), and we encourage you to have a go. If you make mistakes they’re easy to correct, and once you’ve finished building your Gertboard you’ll have a very useful piece of hardware, a new skill, and a lovely warm sense of achievement.
Gertboard isn’t an official Raspberry Pi Foundation product, but it’s designed and produced by someone who’s right at the heart of the Foundation, it fits the Foundation’s goals perfectly, and we endorse it wholeheartedly; we hope to see lots of kids using it as a learning platform along with the Raspberry Pi. Go and preorder one now (lead times should be short); they’re only ￡30, and I predict they’re going to go like hot cakes.
Gert will be answering questions below later today, so pile into the comments if there’s anything you’d like to ask.
来源: http://www.raspberrypi.org/archives/1734
用户手册和组装手册:

http://www.element14.com/community/servlet/JiveServlet/downloadBody/48860-102-3-256002/Gertboard_User_Manual_Rev_1%200_F.pdf
http://www.element14.com/community/servlet/JiveServlet/downloadBody/48916-102-1-256003/Gertboard_Assembly_Manual_Rev1.1_F.pdf

ukonline2000 发表于 2012-8-9 15:53:59

东西是不错
就是太贵了，66美刀，还不含税，这价格我都可以再买两个树莓派了


买它，真不如花几十块淘宝上买个arduino配合各种扩展版来用了

bianbian 发表于 2012-8-9 16:23:27

是贵了点...

glutamine 发表于 2012-8-9 17:21:00

为什么比树莓还贵呢~~

bianbian 发表于 2012-8-9 17:46:32

回 glutamine 的帖子

glutamine:为什么比树莓还贵呢~~ (2012-08-09 17:21) images/back.gif

芯片比树莓多好几个的说...

fzhang74 发表于 2012-8-9 23:15:30

回 ukonline2000 的帖子

ukonline2000:东西是不错
就是太贵了，66美刀，还不含税，这价格我都可以再买两个树莓派了


买它，真不如花几十块淘宝上买个arduino配合各种扩展版来用了
....... (2012-08-09 15:53) images/back.gif

我看怎么是46刀

fzhang74 发表于 2012-8-9 23:19:33

不过46刀也还是太贵，比pi还贵。。。

longbow78 发表于 2012-8-9 23:42:35

回 ukonline2000 的帖子

ukonline2000:东西是不错
就是太贵了，66美刀，还不含税，这价格我都可以再买两个树莓派了


买它，真不如花几十块淘宝上买个arduino配合各种扩展版来用了
.......(2012-08-09 15:53)嬀/color]images/back.gif

山寨它。。。。

ukonline2000 发表于 2012-8-10 10:52:35

回 longbow78 的帖子

longbow78:山寨它。。。。 (2012-08-09 23:42) images/back.gif

呵呵，没有必要山寨它，配合arduino和扩展版使用就行了，何必非要搞这么一个大家伙

huangsh 发表于 2012-8-10 17:18:30

好贵.....直接买个arduino吧
页: [1] 2
查看完整版本: 全程扩展版Gertboard is here!